Skip to content

Select Location

Carpet Installation

Nothing feels so cozy and warm underfoot as new carpet. To get the look you want and help your new carpet last as long as possible, you should consider hiring a professional to install your new carpet. A qualified pro will have the experience and knowledge needed to get the job done right the first time. If you plan to install your own carpet, be sure to check the manufacturer’s warranties and approved installation guidelines. This will help ensure you’ve got coverage and support if unforeseen issues should arise.

 

shaw floors warm memories

Carpet installation is hard work and requires a variety of tools and supplies the average DIY enthusiast might not have on hand. A professional installer will have a broad range of equipment to work with, here are a few items you’re sure to see if you watch the installation process:

Tack Strips

Tack strips are slats of wood nailed to the floor around the outside edge of the carpet installation area. There are angled pins sticking off the top surface that catch hold of the carpet and keep it in place, allowing it to be stretched tight into position.

Knee-Kicker

About a foot and a half long, this tool has teeth at one end that grip the carpet, and a pad at the other end. The teeth grip the surface of the carpet, so it is pushed toward the wall when the installer strikes the padded end with one knee. This causes the carpet to catch on the tack strip in a stretched position.

Seam Roller

This is a spiked cylinder-shaped roller with a handle, something like a small paint roller. The installer uses it to press down on the seam between two pieces of carpet so it sticks to the adhesive applied underneath. This ensures a solid reliable seam in doorways or other high-traffic areas.

Getting Ready for Your Carpet Installation

Preparation is important for a successful carpeting installation. You should consult with a 2nd Street Floors specialist for complete instructions, but here are steps you can take to help the process go smoothly.

  1. If your old flooring has to be removed there may be extra work involved in getting the subflooring ready for your new carpet installation. If the old flooring was glued down or set in place with tile adhesive, the residue will have to be scrapped away. A flooring specialist can make this much easier. An experienced professional will know when the surface is ready for use and may be able to assist you with the disposal of your old flooring.
  2. All the furniture will need to be removed from the room where your new carpet is to be installed. Professional movers and storage experts can make this much easier, especially for items requiring special care. Professional movers can save you a lot of time, also, cutting down on the amount of time you have to live without your furniture to as little as a day before and after the carpet is installed.

During & After Your Carpet Installation

An adult member of your household will need to be present when your carpet installer arrives. This person will need be able to show the installer to the jobsite. For everyone’s safety and to make the job easier, keep children and pets away from the work area until the job has been completed. Your lead installer will be able to answer your questions about the finished product and advise you on how and when you can start using your new carpet.

Flooring brands we love

Choose from any of these great name brands when you shop with us at 2nd Street Floors!

Scroll To Top